idOil-Solar Oil Separator Alarm

idOil-Solar Oil Separator Alarms are solar-powered alarms and communication units for monitoring levels of liquid hydrocarbon, sludge or high levels in oil and sand separators, where main power electricity is unavailable.

idOil-Solar Oil Separator Alarms can be equipped with beacon lights and/or 3G modems.

In case of alarm, idOil-Solar Oil Separator Alarm will either initiate a flashing beacon, send a text message (SMS) to pre-set phone numbers, or both. All alarms are visible locally in the idOil-Solar control unit, during the short wake-up period.

idOil-Solar Oil Separator Alarms remain deactivated most of the time, which mean that they consume minimum power. The device initiates at predetermined measurement intervals, in order to perform the sensor measurements. When equipped with a 3G modem, the device also starts listening at predetermined intervals, to receive any possible setting commands and simultaneously reports measurement values.

Contact sales
Send us an email at salg@tunetanken.dk

  • Battery.
  • Solar panel housing.
  • Charge controller.
  • idOil-30 Battery control device.
  • Selected idOil sensors.
  • Suitable cable connectors.
  • LMS-SAS5 Mounting kit for sensor
  • Up to three idOil-sensors can be connected at the time.
  • Polarity-free connections.
  • Easy installation.
  • Display with system status and alarm information.
  • Can be delivered with different types of sensors.

Specifikationer

TypesW x H x DWeightOperation temperature
SP SolarSET signal light with high water level sensor200 x 400 x 132 mm8,0 kg-30° C...+60° C
SP SolarSET light with oil layer sensor200 x 400 x 132 mm8,0 kg-30° C...+60° C
SP SolarSET light with sludge layer sensor200 x 400 x 132 mm8,0 kg-30° C...+60° C
SP SolarSET light with high water level/oil layer sensor200 x 400 x 132 mm8,0 kg-30° C...+60° C
SP SolarSET light with oil layer/sludge layer sensor200 x 400 x 132 mm8,0 kg-30° C...+60° C

Scroll to Top